Long battery life, uses 2 each CD123 lithium batteries
Ergonomically designed molded non-slip rubber grip
Torque in both clockwise and counterclockwise directions
Battery saving auto-shutoff after two minutes
COMPUTORQ 3 remembers last unit and torque setting selected
Audible tone sounds when set torque walved is reached, if the set torque value is exceeded, an alarm tone will sound
3 color LED light bar: YELLW LED indicates approaching desired torque setting, GREEN LED indicates desired torque value is reached, RED LED indicates fastener was overtorqued, loosen and retighten
When desired torque value is reached, display will hold value and flash for ten seconds
COMPUTORQ 3 will operate in any of four torque units, foot pounds (ft. lbs.), inch pounds (in. lbs.), newton meter (Nm) or kilogram centimeter (kg. cm.)
ACCURACY: Within 2% CW of reading from 20% to 100% of full scale; within 3% CCW of readings from 20% to 100% of full scale
N.I.S.T. traceable certificate of calibration included
Drive: 1/4″
FT. Lb.: 2.0-20.0
In. Lb.: 24-240
Nm: 2.71-27.10
Kg. Cm.: 27.6-276
Length In. (mm): 15 (381)
Wt. Lbs. (kgs): 2.0 (.91)
THE Computorq3 Electronic Torque wrench is a simple to use digital
readout wrench that displays real time torque values in any of four
torque units, ftlbs, in. lbs, Nm., Kg. cm. Simply set the desired torque
value and apply force until the green LED illuminates. Great for light
industrial, automotive, motorcycle, watercraft and aircraft
applications.
